KINGBOLEN EDIAG Plus Bluetooth Diagnostic Scan Tool
✔️All System Diagnose+Full OBDII Functions
✔️Bidirectional Control/Actuation Test:
Ediag plus car scanner diagnostic tool Features Full bi-directional control capability, to send commands to vehicle systems/components, to verify system input/output without using vehicle controls. Such as: turn on the radiator fan, adjust the throttle, open/close windows, operate mirrors, Injector Test, turn on interior & exterior lights, sound horn, test door lock actuators and so on.
✔️ECU Coding:
Customize your car, expand hidden features, or disable annoying features (turn off the rear beep, turn off the seat belt buzzer); Re-identify adaptive data for certain components after repairs or replacements. (Note: Do not support programming).
✔️CANFD+ FCA AutoAuth+ 120 car brands:
EDIAG plus professional scanning tool supports most car models after OBD2 1996 of 120+ car brands, added CAN-FD protocol, which supports the latest for GM vehicles, and AutoAuth can unlock the protected FCA vehicle SGW module on for Chrysler, for Dodge, for Jeep, for Alfa Romeo, and Fiat vehicles manufactured after 2019.
✔️15+ Powerful hot reset functions including OIL RESET, such as
for Audi,
for Toyota,
for Chevrolet,
for Mazda,
for Seat, etc.
✔️Supports AutoAuth for FCA SGW:
A
llows you to unlock protected FCA vehicle SGW module on for Chrysler, for Dodge, for Jeep, for Alfa Romeo, and Fiat vehicles manufactured after 2019 and perform diagnostics, such as read/clear codes, data stream, etc.(*Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.)
✔️Program for Asian cars ---
for Toyota,
for Nissan,
for Honda, etc.
✔️1 year bundled Update.
✔️Auto VIN & Auto Scan:
Automatically retrieve the vehicle identification number, and do a quick scan of full equipped systems.(T ip: Recommend connecting with Network when you make a diagnosis to get a more accurate result.)
Full system Diagnosis:
KINGBOLEN Ediag plus obd2 scanner supports reading all vehicle systems (including ENG, ABS, SRS, ABS, AFS, EBD, TCS, chassis, body and electrical and electronic equipment system, etc.) error code, cleaning code, read data flow, freeze frame. It can also perform all the commands that a mechanic needs to know if the product problem is caused by the car's electrical wiring or car components.
Ø Support OBD2 full function:
1. Read Codes:
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Clear Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitor
3. Data Stream:
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data
4. I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5 .Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8. On-Board Monitor Test:
Retrieves and displays test results for emission-related Powertrain components and systems.
9. Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test:
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
15+ Hot maintenance reset functions
1 Oil Light Reset:
This function allows you to recalculate the engine oil life system after an oil change.
2 TPMS Reset:
When the car tire pressure fault light is on, after performing maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
3 Brake pad reset:
When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the short circuit of the brake pad sensor line is repaired, or after the servo motor is replaced, the reset needs to be done.
4 SAS Calibration:
Calibrate the steering angle sensor and clear the fault memory.
5 Battery Reset:
It is to use Ediag plus to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
6 ABS Bleeding:
When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
7 ETS Learning:
Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
8 Injector Coding:
usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
9 Sunroof initialization:
This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
10 Suspension matching:
When replacing the body height sensor in the air suspension system, after the control module, or when the car is misaligned, this function needs to be performed to adjust the body height sensor for level calibration.
11 Transmission Learning:
When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to a shift delay or impact problem. Then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
12 AFS Headlight Matching:
initialize the adaptive headlamp system.
Etc..
KINGBOLEN Ediag Plus is easy to use and an Ideal Choice for: Technician, advanced DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual.
The CAN-FD Protocol (CAN with Flexible Data-Rate):
The following vehicle models meet -ISO 11898-1:2015(CAN-FD) protocol:
2021
for Chevrolet Tracker/
for Suburban/Tahoe;
2020-2021
for Chevrolet Onix 1.0L(L4F/L4G/LIJ/LIF)/
for Onix 1.2L(LIF);
